Mechanical Battery Connections (MBC) are static or fixed connections whereas Electronic Battery Connections (EBC) are dynamic.

Batteries are DC whereas Switching Battery is Adaptive DC (ADC).

ADC enables voltage modulation. This results in low conversion loss between AC and DC.

A unique feature of the Switching Battery is that it can maintain stable state of charge through its patented simultaneous charging & discharging with load isolation system.

It can further produce any arbitrary waveform to enable Adaptive DC.

Dynamic Para-series (DPS) is a new patented battery connection method.

This method can also be used in all renewable energy systems as they are based on DC.

DPS enables all DC systems to be converted into Adaptive DC which is Switching Battery’s proprietary system.

Voltage shifting is achieved through our coarse modulation technique.

When the source is connected to the Switching Battery in parallel in a first cycle and then shifts to series in a second cycle when connected to the load, this results in voltage shifting from solar panel to Switching Battery.

Switching Battery drives the load in series but receives energy from the source in parallel cycle. Switching Battery releases all energy to the load instantly as required or holds back in its system when not required.

Switching Battery systems are based on electronic DPS battery connection method with software that unlocks latent battery voltage to improve battery efficiency by up to 30%.

Fixed battery connection methods (series or parallel) limit battery efficiency which DPS overcomes easily.

See how our patented method unlocks precise pulse voltage range in this animation.

Adaptive DC (ADC ) is our patented system that enables electricity to move like sound waves.

We use a number of patented modulation techniques to create an arbitrary analog waveform using a full digital control system.

There are 3 different independent cycles in our Switching Battery system that may be modulated at the same time. This enables coarse and fine tuning as well as cell balancing and battery efficiency that is unmatched by any other battery system in the world.

Matrix Controller MC18650-4 is our first commercial product which will be released in 2022.

This 90 second video show some of its unique and unmatched capability.

This is a longer 170 second animation of the Matrix Controller.

Any arbitrary waveform can be created by our software.

This makes Adaptive DC the most powerful system in the world as it replaces several expensive equipment in energy systems.

We released this animation on 14 Feb 2022 on Valentine’s Day to show that Love is a connection method to one another... and energy is electrifying.

Switching Battery reveals new Adaptive Direct Current (ADC) system where both AC and DC integrate seamlessly with unmatched 97% energy efficiency without complex inverters.

We dare anyone to match our system’s efficiency that is based on “special connections”.

Switching Battery is paving the way towards a new era of electronic battery technology.

This animation was released ahead of our website launch on 22.2.22.

By switching between parallel and series at a constant interval, we can average out the voltage.

By changing the duty cycle to having the battery configured more in series, we can increase the average voltage.

By changing the duty cycle to having the battery configured more in parallel, we can decrease the average voltage.

By adding PAM via series arrangement of batteries, voltage range can be increased at discrete multiples of battery voltage, while still enabling fine tuning with PWM.

By leveraging on PWM, PAM and PFM, the ADC system can break free from standard constant voltage to be able to flexibly create arbitrary waveforms.

AC and DC were never compatible until Switching Battery's patented Para-series enabled harmonious conversion between the two.

Switching Battery functions as:

1. Battery with a Switch (BWS)

2. Switch with a Battery (SWB)

Switching battery is the 21st century battery system.

Switching Battery enables energy to move like sound waves.

In this presentation our CTO Stephen Horowitz Ph.D explains the various modulation techniques that may be deployed within the Switching Battery systems.

At any one time, there are a number of tiny switches that are deployed within each battery that are further rotating at various independent speeds and cycles to create any arbitrary waveform.

Switching Battery functions as:

1. Battery with a Switch (BWS)

2. Switch with a Battery (SWB)

Switching battery is the 21st century battery system.

Our engineer Derek takes us through the prototype board demonstration for Switching Battery.

Jabez explains voltage modulation using Para-series for the flashlight.